Total rehabilitering av kontorstol - CFP Report

Solution image

Read more

Report ID
solution-351-cfp
Correlation ID
org-glommaindustrier-solution-351
Assessment Date
2026-11-12 07:58
LCA ID
lca-351
Organization
Glomma Industrier AS
Assessment Type
Internal Carbon Footprint Study
Assessment Method
Simplified LCA-based calculation
Environmental Assessment Statement: This carbon footprint study has been conducted using internal methodologies and simplified life cycle assessment principles. The assessment provides carbon footprint estimates based on available data and established calculation procedures, but does not constitute a full ISO 14044-compliant life cycle assessment.

Carbon Footprint Comparison

Total rehabilitering av kontorstol - CFP Report
13.09 kg CO2-eq

± 2.50 kg CO2-eq

Global Warming Potential (GWP 100)
See report below for details

Over 5 years expected service life

Produksjon av ny kontorstol, aggregert fra 29 EPDer for kontorstoler
42.5 kg CO2-eq
Produksjon av ny kontorstol, aggregert fra 29 EPDer for kontorstoler (adjusted to 5 years)
Comparison baseline
LCA Module: Cradle to gate, A1-A5
Method Source: https://nva.sikt.no/registration/0198e6f19b01-ce2fe63e-91eb-4e7e-acac-7ca385f5db61
Data Quality: UNVERIFIED_AGGREGATION
Geographical coverage: Norge
Reference year: 2021
Declared per: COUNT
Impact category compared: Climate change
Last checked against its source: 2026-08-12
Scaling applied: the baseline covers 8 years and this assessment 5, so the baseline was scaled by 5/8
✓ 29.4 kg CO₂-eq lower emissions
Difference over a period of 5 years
1) Product/Service Description

System: Kontorstolen demonteres og kontrolleres før den trekkes om i sin helhet. Skum og polstring repareres eller skiftes ved behov, og kritiske slitedeler erstattes. Til slutt monteres stolen, funksjonstestes og kvalitetskontrolleres før levering.

Application: Carbon footprint assessment

Purpose: Environmental impact evaluation for Total rehabilitering av kontorstol

Target Audience: Stakeholders and decision makers

2) Functional Unit

Reference Amount: 1 office chair

Definition: Total rehabilitering av kontorstol: 1 count office chair for 5 years

Expected Service Life: 5 years

Type: SERVICE

3) System Boundary

System Boundary: A unit process belongs to this product system when the provider declares it on this solution and it is assessed under module B5 — Refurbishment (use stage). 1 unit process meets that criterion: 'Omtrekk'. Within those processes the flows counted are: 2 declared resource inputs, each counted at the emission factor its category holds; the location assigned to 1 process, counted through that location's energy mix and reported yearly emissions and apportioned as stated under allocation procedures; 2 declared transport legs, counted as tonne-kilometres at GLEC Framework default emission intensities and reported under the EN 15804 module each leg states. Falling outside these criteria: processes belonging to any other life-cycle stage; flows not declared on a process, so transport, capital goods and overheads count only where they appear as an input or within a location's reported yearly emissions; and any declared input whose category holds no emission factor, which contributes zero rather than an estimate (cut-off).

Allocation Procedures: Location emissions are allocated physically by productive time: the location's yearly emissions (energy mix plus reported yearly emissions) are divided by its yearly productive hours to give a per-minute factor, applied to the time each process occupies it. Applied to: 'Omtrekk' at Glomma Industrier AS Årnes. The emission factors applied were calculated under: no stated method for Syntetisk tekstil, Kaldskum, whose sources do not state an allocation procedure.

Product System Components:

Component TypeIDDescriptionData SourceData Quality
Process process-omtrekk (ADD_VALUE, Module: B5) - -
Resource resource-18701 Syntetisk tekstil (virgin resource)
Estimat
Utslippsfaktorer møbeltekstiler - EPD 2026-08-10.pdf ESTIMATE
Resource resource-18201 Kaldskum (virgin resource) Glomma Industrier AS - CO2e innhentede tall for bygg og materialer V2.pdf ESTIMATE
Resource location-omtrekk-18601 Glomma Industrier AS Årnes (energy) Glomma Industrier AS Årnes ESTIMATE
Transport leg transport-omtrekk-0-0 Transport: Road freight Norway, diesel, 200 km x 15 kg, arrival GLEC Framework v3.1, Table 8 EU road defaults, articulated truck 34-40 t GVW, average/mixed load, diesel (WTW 101 g/tkm) (mode catalog 2026-08) THIRD_PARTY_REVIEWED
Transport leg transport-omtrekk-0-1 Antatt transport tilbake til brukersted — Transport: Road freight Norway, diesel, 200 km x 15 kg, departure GLEC Framework v3.1, Table 8 EU road defaults, articulated truck 34-40 t GVW, average/mixed load, diesel (WTW 101 g/tkm) (mode catalog 2026-08) THIRD_PARTY_REVIEWED
4) Assessment Methodology

LCA Methodology: Internal Life Cycle Assessment Framework

Impact Assessment: Life Cycle Impact Assessment using established characterization factors

Carbon Footprint Approach: Simplified carbon accounting methodology

LCIA Methodology: IPCC_GWP_100

Calculation Approach: Process-based LCA with appropriate allocation methods where applicable

Interpretation: GWP assessment

5) Environmental Impact Results

Climate change

13.09 kg CO2-eq
± 2.50 kg CO2-eq

The characterization model for GWP 100 is a conversion factor that translates the mass of a greenhouse gas emitted into its equivalent effect on global warming, expressed in terms of CO2. This conversion is done based on the radiative forcing and the atmospheric lifetime of the greenhouse gases.

Detailed Results:

  • CO2-eq: 5.7 kg
    ± 1.1 kg
    Description: Release of 5.7 kg CO2-eq from usage of Syntetisk tekstil (virgin resource)
  • CO2-eq: 1.5 kg
    ± 0.30 kg
    Description: Release of 1.5 kg CO2-eq from usage of Kaldskum (virgin resource)
  • CO2-eq: 5.2 kg
    ± 1.0 kg
    Description: Release of 5.2 kg CO2-eq from usage of Glomma Industrier AS Årnes (energy)
  • CO2-eq: 0.30 kg
    ± 0.0 kg
    Description: Release of 0.30 kg CO2-eq from Transport: Road freight Norway, diesel, 200 km x 15 kg, arrival
  • CO2-eq: 0.30 kg
    ± 0.0 kg
    Description: Release of 0.30 kg CO2-eq from Antatt transport tilbake til brukersted — Transport: Road freight Norway, diesel, 200 km x 15 kg, departure
13.09 kg CO2-eq

± 2.50 kg CO2-eq

Total Carbon Footprint

Global Warming Potential (GWP 100)

6) Data Quality and Uncertainty

Data Quality Assessment: This carbon footprint calculation uses a tiered data quality system to indicate the reliability and precision of emissions factors and characterization factors in the CO2-equivalent calculations.

Uncertainty Range Methodology:

Approach: Instead of presenting single-point emission estimates, this assessment displays results as uncertainty ranges with mean values and error margins. This methodology provides a more realistic representation of emissions uncertainty based on data quality variations.

Range Calculation: For each emission source, the system calculates an uncertainty range where the lower bound represents the original emission value and the upper bound incorporates the data quality adjustment. The displayed mean value represents the midpoint of this range, while the error margin indicates the spread around this mean.

Data Quality Hierarchy and Uncertainty Factors:

Calculation Examples:

Interpretation: The mean value provides the best estimate given the available data quality, while the error margin indicates the potential variation. Larger error margins reflect greater uncertainty due to lower data quality, providing users with transparent information about result reliability.

Sources and Quality Assessment:

Calculation Approach: Simplified carbon footprint calculations prioritize established emission factors from recognized databases and methodological sources. Results are presented as uncertainty ranges where available, with error margins reflecting the reliability of underlying data quality used in CO2-equivalent calculations.

7) Limitations and Assumptions

Assumptions: Emission factors are secondary data from published EPDs and comparable sources, rather than measurement at the supplier. No primary data was collected from the supply chain for this assessment. Transport is calculated at GLEC Framework default emission intensities rather than carrier-specific data, which ISO 14083 ranks below modelled and primary data. Transport distances and cargo masses are as stated by the author, not measured.

Limitations: Only the climate-change impact category is quantified; other environmental impacts are outside this assessment. The use phase is excluded from the assessed system. End-of-life treatment is excluded from the assessed system. The comparison baseline has not been independently verified.

Service Life Considerations: This assessment assumes an expected service life of 5 years for the assessed product/service. The comparison baseline ("Produksjon av ny kontorstol, aggregert fra 29 EPDer for kontorstoler") has an expected service life of 8 years. Emissions have been linearly adjusted to enable fair comparison over the 5-year assessment period.

Comparison Methodology: Comparative results are calculated by linearly scaling emissions based on the ratio of expected service life periods. This approach assumes uniform emission distribution over the service life and may not reflect actual usage patterns or degradation effects.

Methodology: This assessment uses internal calculation methodologies and simplified LCA principles. While based on established practices, it does not fully conform to ISO 14044 standards.

This study should be interpreted within the context of the internal methodological framework and system boundaries applied.

8) Contact Information

Study Issuer: Glomma Industrier AS

System ID: system-351

Organization Website: https://glommaindustrier.no

Assessment Website: https://www.sirktek.no

Assessment Tool: Sirktek ERP LCA calculations API